Тормоза - важнейшее средство безопасности любого автомобиля. В легковых автомобилях обычно используются два типа тормозов: дисковые тормоза и барабанные тормоза.
С появлением новых технологий мотоциклы становятся мощнее и быстрее. Прошли те времена, когда люди покупали велосипед, чтобы просто добираться из пункта А в пункт Б. Теперь покупатели обращают внимание на производительность при покупке мотоцикла. С увеличением мощности и скорости тормоза также нуждались в обновлении. Итак, дисковые тормоза - это обновление барабанных тормозов. В этой статье мы обсудим, чем дисковые тормоза лучше барабанных.
Давайте сначала обсудим, как работают дисковые тормоза:
Когда вы нажимаете тормозной рычаг, масло выталкивается к суппортам и по очереди; он оказывает давление на колодки, которое создает трение с диском, замедляя или останавливая мотоцикл. Это показано на анимации ниже:
Чем дисковые тормоза лучше барабанных:
1.) Рассеивание тепла: поскольку дисковый тормоз расположен снаружи колеса, он легко остывает по сравнению с барабанным тормозом. Барабанный тормоз расположен внутри колеса, поэтому вероятность нагрева тормозов очень высока.
2.) Тормозное усилие: дисковый тормоз обеспечивает более эффективное тормозное усилие по сравнению с барабанным тормозом. Мы также можем увеличить эффективность тормозов, добавив колодки большего размера или несколько колодок. Наличие двойного диска также позволяет увеличить тормозное усилие.
3.) Отсутствие повреждения колеса: в барабанной тормозной системе колодки соединены с пружиной, которая вызывает трение с колесом. Таким образом, трение может привести к перегреву внутри колеса и постепенному повреждению колеса. А вот с дисковыми тормозами такой проблемы нет.
4.) Техническое обслуживание: во время технического обслуживания дискового тормоза вам нужно только очистить диск и колодки наждачной бумагой. Но при периодическом обслуживании барабанного тормоза нужно снимать колесо целиком.
5.) Доступные запчасти: и диск, и тормозные колодки не такие уж и дорогие, и их можно заменить очень сильно. Но если что-то пойдет не так с барабанными тормозами, есть шанс повредить колесо. Так что поврежденное колесо могло быть дорогим делом.
Хотя у дисковых тормозов есть несколько недостатков, таких как блокировка колес, высокая начальная стоимость и обслуживание тормозной жидкости, эти недостатки дисковых тормозов незначительны. Дисковые тормоза всегда лучше, чем барабанные, и обладают отличными тормозными характеристиками.
Большинство компаний обычно предлагают дисковые тормоза только в передней части некоторых из своих предложений с меньшим рабочим объемом. Это помогает улучшить торможение, а также позволяет контролировать цену мотоцикла.
Brakes are the most important safety feature of any automobile. There are two kinds of brakes which are generally used in case of passenger vehicle: disc brakes and drum brakes.
With the advent of new technology, motorcycles are getting more powerful and faster. Gone are the days when people used to buy a bike to just commute from point A to B. Now, customers look for performance when buying a motorcycle. With the increase in power and speed, the brakes also needed an upgrade.So disc brakes are an update to drum brakes.In this article we will discuss how disc brakes are better than drum brakes.
Let us first discuss how disc brakes works:
When you pull the brake lever, the oil is pushed towards the calipers and in turn; it applies pressure on the pads which creates friction with the disc to slow or stop the motorcycle.This is demonstrated in animation below:
How disc brakes are better than drum brakes:
1.)Heat Dissipation: As the disc brake is located outside the wheel, it cools down easily as compared to drum brake. The drum brake is located inside the wheel, so chances of brakes getting heated are very high.
2.)Stopping Power: The disc brake offers efficient stopping power compared to drum brake. We can also increase the bite of the brakes by adding bigger pads or multiple pads. Having dual disc is also an option to increase the braking power.
3.)No Wheel Damage: In a drum brake system, shoes are connected to a spring which causes friction with the wheel. So, the friction might result in overheating inside the wheel and it could damage the wheel gradually. But there is no such problem with the disc brakes.
4.)Maintenance: During the maintenance of a disc brake, you only need to clean the disc and the pads with a sanding paper. But during a periodic maintenance of a drum brake, you need to remove the entire wheel.
5.) Affordable Spares: Both the disc and the brake pads are not that expensive and it can be changed very caliper. But if something goes wrong with the drum brakes, there are chances of damage to the wheel. So a damaged wheel could be an expensive affair.
Although there are few disadvantages with disc brakes like wheel lockup,high initial cost and brake fluid maintenance but these disadvantages of disc brakes are negligible. Disc brakes are always better than drum brakes and can deliver excellent braking performance.
Most companies usually offer disc brakes at just the front-end on some of their smaller displacement offerings. This helps improves braking while also keeping the price of the motorcycle in check
![Engineering College Engineering College](/sites/engg.directory/files/default_images/Engineering%20College.jpg)
Startup
A startup or start-up is a company or project undertaken by an entrepreneur to seek, develop, and validate a scalable business model. While entrepreneurship refers to all new businesses, including self-employment and businesses that never intend to become registered, startups refer to new businesses that intend to grow large beyond the solo founder. At the beginning, startups face high uncertainty and have high rates of failure, but a minority of them do go on to be successful and influential. Some startups become unicorns; that is privately held startup companies valued at over US$1 billion.
Actions
Startups typically begin by a founder (solo-founder) or co-founders who have a way to solve a problem. The founder of a startup will begin market validation by problem interview, solution interview, and building a minimum viable product (MVP), i.e. a prototype, to develop and validate their business models. The startup process can take a long period of time (by some estimates, three years or longer), and hence sustaining effort is required. Over the long term, sustaining effort is especially challenging because of the high failure rates and uncertain outcomes. Having a business plan in place outlines what to do and how to plan and achieve an idea in the future. Typically, these plans outline the first 3 to 5 years of your business strategy.
Design principles
Models behind startups presenting as ventures are usually associated with design science. Design science uses design principles considered to be a coherent set of normative ideas and propositions to design and construct the company's backbone. For example, one of the initial design principles is "affordable loss".
- Log in to post comments